Malaysia electricity tariff 2025: how it affects factories
Published · 6 min read · IoTronix Solution
In short
From 1 July 2025, the Energy Commission set an average base tariff of 45.40 sen/kWh for Peninsular Malaysia. Bills are now split into energy, capacity and network charges, plus a monthly charge for billing and customer service. Fuel cost changes now go into a monthly Automatic Fuel Adjustment. For factories, idle machines drawing power during the 2 pm to 10 pm weekday peak now cost more than at night or on weekends. So you need to know which machine uses how much power, and when.
What changed on 1 July 2025
Suruhanjaya Tenaga (the Energy Commission, ST) set a new tariff for Tenaga Nasional Berhad (TNB) customers in Peninsular Malaysia under Regulatory Period 4 (RP4). It applies from 1 July 2025 to December 2027 [1].
ST raised the average base tariff to 45.40 sen/kWh, from 39.95 sen/kWh [1]. Of that, 32.42 sen covers generation and 12.98 sen covers TNB capital expenditure [1].
ST also replaced consumption tiers with categories based on supply voltage [1]. Every bill is now split into four parts: energy, capacity, network, and a charge for billing and customer service [1].
Which tariff category your factory is in
TNB groups non-domestic customers by their supply voltage [2]. Most factories with their own substation are in the medium voltage group.
| Category | Supply voltage | Old tariff codes |
|---|---|---|
| Non-Domestic Low Voltage | Above 50 V up to 1 kV [2] | See myTNB tariff page [2] |
| Non-Domestic Medium Voltage General | Above 1 kV up to 50 kV [2] | C1, E1, F1 [2] |
| Non-Domestic Medium Voltage ToU | Above 1 kV up to 50 kV [2] | C2, E2, F2 [2] |
| Non-Domestic High Voltage | Above 50 kV up to 230 kV [2] | See myTNB tariff page [2] |
Check the tariff name printed on your latest TNB bill. The rates are different for General and ToU. So your category decides how much the time of use affects your bill.
Time of use: the hours with higher rates
Under the ToU tariffs, TNB sets the peak window at 2 pm to 10 pm, Monday to Friday. Off-peak runs from 10 pm to 2 pm on weekdays, and all 24 hours on Saturday and Sunday [2]. ST made the off-peak period longer as part of the July 2025 change [1].
For medium and high voltage customers, part of the bill is based on maximum demand. TNB does not charge maximum demand that occurs during the off-peak period [2]. So a power spike at 3 pm on a Wednesday counts. The same spike at 11 pm does not.
The monthly fuel cost adjustment (AFA)
The Automatic Fuel Adjustment (AFA) replaced the six-monthly Imbalance Cost Pass-Through (ICPT). It moves every month with fuel prices and the exchange rate [1].
In 2026 the AFA has been a surcharge. ST set it at +3.80 sen/kWh for August 2026 and +3.67 sen/kWh for September 2026 [3]. The mechanism adjusts automatically by up to 3 sen/kWh, and larger moves need Cabinet approval [3]. In your budget, treat the AFA as a cost on every kWh that changes every month.
One way to pay less AFA is TNB's Green Electricity Tariff (GET). The GET premium starts from 3 sen/kWh on a three-year subscription [4]. The AFA is waived on the green units you subscribe to [3].
Why idle machines now matter on your bill
Industry uses about 46% of Malaysia's energy demand, according to PETRA's NEEAP 2.0 [5]. A large share of factory electricity goes to motors, compressors, heaters and chillers.
Many of these keep drawing power when the line is not producing: an injection moulding machine holding barrel temperature during a material shortage, a compressor losing air through leaks during lunch, a CNC spindle left on between jobs. Under the RP4 structure, each of those kWh pays the energy charge plus the AFA. If the idle load sits inside the 2 pm to 10 pm window on a ToU account, it is billed at the peak rate and can add to maximum demand [2].
The main TNB meter cannot tell you which machine caused this. It reports only the site total, so you cannot see idle load in the monthly number.
What your factory should do next
- Confirm your tariff category and whether you are on General or ToU [2].
- Get 12 months of bills and separate the energy charge, the demand charges and the AFA line.
- List machines that can run without producing: furnaces, ovens, moulding machines, compressors, chillers.
- Measure when those machines draw power and whether they are making parts at the time.
- Move start-up, warm-up and batch jobs into off-peak hours where the process allows [2].
- Compare the GET cost with the current AFA if your customers ask for green electricity [3] [4].
See which machines use power at peak rates
Energy meters and FactoryOS energy apps show your power bill per machine and per job. Start with a free 30-minute Factory Paperwork Check: we come to your factory and show you the 3 processes that waste the most time.
Questions
What is the TNB base tariff from July 2025?
The Energy Commission set the average base tariff at 45.40 sen/kWh for 1 July 2025 to December 2027, up from 39.95 sen/kWh [1]. The AFA is charged on top and changes every month [1].
What are the peak hours under the new time-of-use tariff?
Peak is 2 pm to 10 pm, Monday to Friday. Weekday hours from 10 pm to 2 pm, and all of Saturday and Sunday, are off-peak [2].
Sources
- [1]Lowyat.NET. Energy Commission Announces New Electricity Tariffs For Peninsular Malaysia; Effective 1 July 2025, 2025-06-20
- [2]myTNB (Tenaga Nasional Berhad). Tariff
- [3]paultan.org. TNB AFA rate September 2026 set at +3.67 sen/kWh, 2026-09-02
- [4]Tenaga Nasional Berhad. Green Electricity Tariff (GET)
- [5]Ministry of Energy Transition and Water Transformation (PETRA). National Energy Efficiency Policy and Action Plan 2026 to 2035 (NEEAP 2.0)
