Skip to content
IoTronix Solution

Solutions

Factory automation solutions, sorted by the problem you have

IoTronix solves six common problems in Malaysian factories, from machine downtime to approvals stuck on WhatsApp. One team handles both the machines and the software, so you only call one company.

M1M2M3

Factory problems we fix

Six problems that cost your factory time and money

Each one has ready-made apps. Each one can start with the machines you already have.

01 · Downtime and breakdowns

“Which machine is down right now?”

What we provide: Machine connection, Breakdown Reporting, Maintenance Scheduling, OEE Tracker and Machine Health & Status. The breakdown report opens automatically when a machine stops. It records every minute the machine is down.

02 · Electricity cost

“Your power bill, per machine and per job”

What we provide: Energy meters, energy dashboards, Electrical Energy Usage Monitoring and Job Costing. The meters show what each machine and each job uses, in RM.

03 · Quality and defects

“Find rejects before your customer finds them”

What we provide: AI camera inspection, Final QC Inspection, NCR and First Article Inspection. Each batch gets a pass or fail. Every non-conformance stays open until someone closes it.

04 · Stock and store

“Know your stock without a full count”

What we provide: Material Request, Spare Parts Tracker, Inventory Cycle Counter and Goods Receiving Note. Store requests are approved on the phone. Staff count part of the store each day, instead of all of it once a year.

05 · Safety and compliance

“Ready for inspection, every day”

What we provide: Air quality and tank level monitoring, Permit To Work, Incident Management and Calibration Tracking. Permits, incidents and calibration due dates are kept in one place, ready when the auditor asks.

06 · Paperwork and approvals

“No more chasing approvals on WhatsApp”

What we provide: E-Claim, Overtime Pre-Approval, Shift Handover and Shift Roster. Claims and overtime go to the right person and get approved on the phone.

Machine connection

A machine monitoring system that works on old machines

Where possible, we read the data from the machine's controller. Where not, we fit our own sensors on the outside: cycle count, run and stop, motor current, temperature. The machine runs the same way as before.

machine, any agesensorgatewayFactoryOS

Read data from the machine you already have

If the controller can share its data, we read it from the controller. Many older machines cannot, so we fit our own sensors on the outside. We do not rewire the machine's controls.

  • Clamp on the power cable: motor current, so run and stop
  • Counter on the ejector or cutter: cycle count
  • Probe on the barrel or motor: temperature
  • Sensor on the motor housing: vibration

For engineers

  • Modbus RTU/TCP
  • OPC UA
  • MQTT
  • Mitsubishi, Siemens and Omron PLCs
  • Euromap 63/77
  • CAN Bus
  • LoRaWAN
  • RS-485

We design our own gateways and PCBs.

See how these gateways connect old and new machines

Automation and PLC programming

Factory automation and PLC programming, from the same team

Our engineers work with PLCs, sensors and machine wiring. They also build apps, dashboards and cloud systems. You deal with one company, not a machine vendor, an electrician, a PLC programmer and an IT company.

  • Siemens PLC programming, process monitoring and control for hegatec Engineering
  • Data collection from an Omron PLC and conveyor condition logging for Daikin Malaysia
  • On-site installation and commissioning by our own engineers

What IoTronix builds

Machines and software, from one team.

Most factories start with one FactoryOS App. The same engineers connect the machines and design the hardware, so you do not deal with many vendors.

Hardware

Custom electronics, from idea to certified board

The team that builds FactoryOS hardware also designs PCBs and firmware for other companies.

See the hardware

Machine integration

Connect old and new machines

Custom gateways and interface boards, so machines of every brand and age share one set of data.

See machine integration

Software

FactoryOS

100+ ready-made apps for daily factory work. Start with your biggest problem. It is live in 2 weeks.

Try the FactoryOS demo

Questions about machine connection

Is this the same as the machine monitoring other suppliers sell?

Yes, mostly. Most suppliers call it an IoT solution: sensors on each machine send readings to your phone. We call it machine connection because that is what you get.

Can you monitor machines that have no PLC?

Yes. We fit our own sensors on the outside of the machine: a clamp on the power cable for run and stop, a counter for cycles, a probe for temperature. The machine runs the same way as before.

Do I need a control-room system to monitor my machines?

Usually not. For a factory of 50 to 300 staff, FactoryOS dashboards do the monitoring part of SCADA. You get run and stop, output and breakdown alerts on your phone.

Is FactoryOS an MES?

Not a full one. FactoryOS covers the MES jobs an SME factory needs first: production reports from machine counts, downtime, OEE and maintenance. It is not built for large factories that already run a full MES or ERP with their own IT team.

What does energy monitoring per machine cost?

Machine monitoring dashboards are RM500 a month with unlimited users. The energy meters and connection hardware are quoted after a free site visit.

Will my operators feel they are being watched?

The sensors read the machine, not the person: run and stop, cycle count, current and temperature. Your staff still run the factory. FactoryOS lets you check and manage it from anywhere.