Machine Health & Status
Every machine, live on your phone
See which machines are running, which are idle, and whether the shift is on target. Check from anywhere, without calling the supervisor.
FactoryOS Apps
FactoryOS is manufacturing software with 101 ready-made apps for Malaysian factories, from breakdown reports and OEE to e-claims. Machine counts and sensors fill in the data, so nobody keys in numbers. Pick the app for your biggest problem. It is live in 2 weeks. Then add the next one.

Machine Health and Status
Breakdown reports

These are the main apps in each area. Each one works on simple phone and tablet screens. Each one can be used on its own.
Machine Health & Status
Run, stop and condition of every machine, live.
Breakdown Reporting
Opens automatically when a machine stops. Records every minute of downtime.
Maintenance Scheduling
Planned maintenance per machine, with what is due next.
Pre-Shift Inspection
The machine checklist, done on the phone before the shift.
Vibration
Vibration readings from a sensor on the motor.
Thermal
Temperature readings from the machine.
Data filled in by: Sensors. A breakdown report opens automatically when a machine stops.
Production Report
Output per machine, filled from machine counts.
OEE Tracker
Availability, performance and quality per machine.
Speed Loss
Where a machine runs slower than it should.
Cycle Time Deviation
Cycles that run longer than the standard.
Work Order Traveler
Each work order and its progress.
Shift Handover
What the next shift needs to know, in one place.
Data filled in by: Machine counts fill in the reports.
Electrical Energy Usage
Power use for the whole factory.
Machine Energy Usage
Electricity used by each machine.
Job Costing
What each job cost to make, power included.
Scrap Metal Revenue
Scrap sold, by weight and in RM.
Carbon Footprint
Emissions calculated from the same energy data.
Data filled in by: Energy meters: cost per machine, per job, per square foot.
Final QC Inspection
Pass or fail for each batch.
First Article Inspection
Checklist and sign-off before a job starts.
NCR
Non-conformances, tracked until closed.
Raw Material Defect Log
Defects found in incoming material.
RMA & Complaints
Customer returns and complaints, tracked.
Data filled in by: AI camera.
Material Request
Requests to the store, approved on the phone.
Spare Parts Tracker
Spares in stock and what is running low.
Goods Receiving Note (GRN)
Receive deliveries and update stock.
Inventory Cycle Counter
Count part of the store each day, not all of it once a year.
Supplier Delivery
Deliveries checked against what was ordered.
Dispatch Tracking
What left the factory, and when.
Data filled in by: AI reads delivery orders. A camera counts stock.
E-Claim
Submit and approve claims on the phone.
Overtime Pre-Approval
OT approved before staff work it.
Shift Roster
Who works which shift.
Permit To Work
Permits for risky jobs, approved in the app.
Calibration Tracking
Calibration due dates for every instrument.
Licence Expiry
Licences and permits, with a reminder before they expire.
Data filled in by: Easy to start.
What changes in your factory
Machine counts, sensors and energy meters fill in the apps, so the report is ready when you open it.
Machine Health & Status
See which machines are running, which are idle, and whether the shift is on target. Check from anywhere, without calling the supervisor.
Approvals
E-Claim, Overtime Pre-Approval and Material Request go to the right person and get approved on the phone. Nothing waits for one person.
WhatsApp · FactoryOS
Machine B-07 vibration has been rising since 2pm. Check it before the night shift.
AI condition monitoring
AI watches how each machine runs and warns the team early. Operators do not need high technical skill. Solo Labeller's machines run with it.
OEE Tracker
Availability, performance and quality from the machine's own counts. Speed Loss and Cycle Time Deviation show where the time is lost.
Production Report
Production reports and shift handovers come from machine counts. For hegatec Engineering, AI writes the machine reports automatically.
Energy & cost
Energy meters give the cost per machine, per job or per square foot. The same data feeds the Carbon Footprint app.
Try it: stop a machine
This board uses the moulding machines from the FactoryOS demo plant. Stop one machine and see the breakdown report open automatically.
Machine run/stop status
Demo plant · not real data · shift clock 07:00
Bottle cap 28 mm
0
good parts this shift
Food container lid
0
good parts this shift
Switch box housing
0
good parts this shift
Plant pot 6 inch
0
good parts this shift
Wall switch cover
0
good parts this shift
Storage box 20 L
0
good parts this shift
Try it: stop a machine
Nobody fills in a form. See what opens.