Skip to content
IoTronix Solution

Smart factory · Malaysian SME factories

A smart factory for Malaysian SMEs starts with one process, not new machines.

A smart factory is a factory where the numbers enter themselves. Machines report their own output and stops, paperwork and approvals run in apps, and the owner sees it all on a phone. FactoryOS gets an SME factory there one app at a time, on the machines it already has.

Free · 30 minutes at your factory · reply within 1 working day

BEFOREWITH FACTORYOS
  • No new machines needed. We connect the old ones.
  • Start with one app for RM3,000, live in 2 weeks.
  • One team in Puchong, from the sensor to the phone.

What it means

Smart factory, in plain words: the same daily questions, answered without asking anyone.

Most SME factories already do the work. What they lack is the data, because it sits on paper, in one person's Excel file or in a WhatsApp group. A smart factory moves that data into one system, where it enters itself.

  • What is today's output per machine?

    On paper, Excel and WhatsAppCall the supervisor, or wait for tomorrow's report.

    In a smart factory with FactoryOSMachine counts fill the production report. The boss sees it on his phone without asking anyone.

  • Which machine is down right now?

    On paper, Excel and WhatsAppSomeone reports it by WhatsApp, or shouts across the floor.

    In a smart factory with FactoryOSA breakdown report opens itself when the machine stops, and the technician gets it on his phone.

  • What does electricity cost per machine or per job?

    On paper, Excel and WhatsAppNobody can say. The power bill arrives as one number.

    In a smart factory with FactoryOSEnergy meters show the cost per machine, per job, even per square foot.

  • Who approves this overtime?

    On paper, Excel and WhatsAppIt waits for one person's signature on paper or WhatsApp.

    In a smart factory with FactoryOSOvertime Pre-Approval runs in an app, so it does not stop when someone is on leave.

How to get there

Four steps to a smart factory. You decide when to take the next one.

  1. Step 1

    First app

    Move the one process that wastes the most time off Excel. Live in 2 weeks, from RM3,000.

    See the 100+ apps
  2. Step 2

    Connect departments

    Production, maintenance, store and QC in one system, so a request no longer needs a phone call.

    See solutions by problem
  3. Step 3

    Machines report themselves

    Our sensors and meters fill the system, on old and new machines. No more key-in.

    See machine integration
  4. Step 4

    AI on top

    Early warnings before a machine stops, camera checks and reports written automatically.

    See what each step costs

Why IoTronix

Built here, not resold. Changed in phases, not all at once.

  • 01

    Built in-house, in Malaysia

    Our team in Puchong designs and builds the hardware (gateways, boards, sensors, firmware) and the software (FactoryOS apps and dashboards). We do not resell another company's software.

  • 02

    Customised to your factory

    Because we build both sides ourselves, any app, screen or gateway can be changed to fit your process and your machines.

  • 03

    Phased, lowest-cost step first

    We plan the change to your old system in phases and start with the step that costs least. You keep what works and add to it.

  • 04

    One long-term partner

    The same team stays with you from design to the production line, and after go-live. No reseller markup, so prices stay competitive.

What you do not need

You don't need a new factory to have a smart factory.

New machines

We read the controller where possible and clip on our own sensors where not: cycle count, run and stop, motor current, temperature. The machine runs the same way as before.

An IT team or a server

FactoryOS runs in the cloud and opens on a phone or tablet. IoTronix installs the hardware and looks after it.

A full ERP

Most SME factories don't need one. We build around your process, or send machine data to the ERP you already run by API.

Do you need an ERP?

Fewer people

Your people still run the floor. FactoryOS lets you see and manage it from anywhere.

NIMP 2030 · MITI

3,000

smart factories by 2030

Why now

Malaysia has set a minimum target of 3,000 smart factories by 2030.

MITI set the target, as reported by MIDA. Grants and allowances for factory automation open and close often, so we keep their status, with sources, on our funding page.

Source: MIDA: Malaysia sets minimum target of 3,000 smart factories by 2030

See grants and allowances, as checked

Puchong, Selangor

Based in Puchong. We visit factories across the Klang Valley.

The free Factory Paperwork Check happens at your factory. Our first focus is plastics and rubber factories and metal processing in the Klang Valley and Selangor.

See what a visit in KL and Selangor involves
IoTronix Solution Sdn Bhd16-3, Jalan Puteri 2/4, 47100 Puchong, Selangor+60 16-297 1280

Smart factory questions from SME owners

What is a smart factory?

A smart factory is a factory where data enters itself. Machines report their output, stops and energy use, daily paperwork runs in apps, and managers see it on a phone instead of asking someone. The term is often linked to Industry 4.0. For an SME factory, it can start with one process.

How does a Malaysian SME factory start?

Start with the process that wastes the most time, not with new machines. IoTronix begins with a free 30-minute Factory Paperwork Check at your factory, then puts one ready-made FactoryOS app on that process. It costs RM3,000 and is live in 2 weeks. Departments, machines and AI come after that, one step at a time.

Is FactoryOS resold software?

No. IoTronix designs and builds FactoryOS itself, both the software (apps and dashboards) and the hardware (gateways, boards, sensors and firmware), in-house in Puchong, Selangor. That is why every part can be customised to your factory, and why there is no reseller markup in the price.

Can you transform our old system without replacing everything?

Yes. We plan it in phases and start with the lowest-cost step, usually one app on one painful process. Your machines, PLC programs and any ERP you already run stay in place, and we add to them step by step as a long-term partner, not a one-off vendor.

Who builds the hardware?

Our own team. The gateways, interface boards, sensors and firmware are designed and built in-house, the same team installs them, and our engineer is on site within 24 hours for hardware faults.

Do we need new machines?

No. We read the machine's controller where possible and fit our own sensors where not, so old machines with no data port report too. We connect Modbus RTU and TCP, OPC UA, MQTT, Mitsubishi, Siemens and Omron PLCs, Euromap 63/77, CAN Bus, LoRaWAN and RS-485.

How much does a smart factory cost in Malaysia?

With FactoryOS, the first app is RM3,000, live in 2 weeks. App modules customised to your process start from RM8,000 each, app subscriptions from RM90 a month per 5 users, and machine monitoring dashboards are RM500 a month for unlimited users. Machine connection hardware is quoted after a free site visit.

What do other suppliers call this?

You will hear it called an IoT project, Industry 4.0 or smart manufacturing. The government programme is Industry4WRD. For an SME factory the work is the same: connect the machines, move paperwork into apps, and see the numbers on a phone.

Will a smart factory take away our workers' jobs?

No. Your people still run the floor. FactoryOS takes away the typing, the chasing of signatures and the waiting for reports, so the factory does not stop when one person is on leave.

Are there grants for a smart factory?

Some Malaysian schemes have funded smart factory and automation spending, but they open and close. Our funding page lists each grant and allowance with its status as checked and its official source. Check it before you plan around a grant.

Free · 30 minutes

Find where your smart factory should start.

Book the free Factory Paperwork Check. We visit your factory and show you the 3 processes that waste the most time.