Skip to content
IoTronix Solution

PDPA amendments 2024: rules for factory worker data

Published · 7 min read · IoTronix Solution

In short

The Personal Data Protection (Amendment) Act 2024 came fully into force on 1 June 2025. It added four main rules: report data breaches within 72 hours, appoint a data protection officer (DPO) above set limits, data portability, and new rules for sending data overseas. A factory that collects worker badges, fingerprint or face attendance, or CCTV footage is a data controller. It must apply all these rules to its own staff data.

Most factory owners think the Personal Data Protection Act 2010 (PDPA) is only about customer lists for marketing. It covers more than that. Your workers are data subjects too. A modern factory collects a lot of data about them: access badges, attendance punches, fingerprints or face scans, CCTV, and operator logins on machines. The 2024 amendments made the penalties for all of this higher.

When the new rules started

The Minister of Digital started the Personal Data Protection (Amendment) Act 2024 in three stages [1].

DateWhat started
1 January 2025 [1]Technical changes, such as electronic service of notices. No new duties on controllers [1].
1 April 2025 [1]"Data user" renamed "data controller", wider definitions, the security principle extended to data processors, higher penalties, new cross-border transfer rules [1].
1 June 2025 [1]Data protection officer (DPO), data breach notification, and the data portability right [1].

The maximum fine for breaching the data protection principles rose from RM300,000 to RM1,000,000, and the maximum jail term from 2 to 3 years [2]. Biometric data is now listed as sensitive personal data [2].

Reporting a data breach

On 25 February 2025, the PDP Commissioner issued guidelines on reporting breaches and on appointing a DPO. They started with the law on 1 June 2025 [3]. Under these guidelines, a controller must tell the Commissioner within 72 hours of knowing about a breach [4]. If the breach causes or may cause significant harm, it must also tell the affected people within 7 days after that first notice [4].

For a factory, a breach can be a stolen HR laptop, a payroll file sent to the wrong person, a hacked attendance system, or CCTV footage leaked from a cloud account. With only 72 hours, you must decide in advance who makes the decision, who contacts the Commissioner, and where the records are.

Does your factory need a DPO?

A controller or processor must appoint a DPO if any one of these is true [4]:

  • It processes personal data of more than 20,000 data subjects [4].
  • It processes sensitive personal data, including financial information, of more than 10,000 data subjects [4].
  • Its activities need regular and systematic monitoring of personal data [4].

Workers, former workers, job applicants and visitors all count as data subjects. A factory with a few hundred staff will rarely pass 20,000. But fingerprint or face attendance is biometric, so it is sensitive data [2]. Full-time CCTV or location tracking of staff may also count as regular monitoring. Check the DPO guideline against your own systems. When the requirement started, HHQ noted that controllers had 21 days from 1 June 2025 to register appointed DPOs with the Commissioner [4].

Moving data to another company or overseas

From 1 June 2025, a person can ask a controller to send their personal data directly to another controller. This applies only if it is technically possible and the formats work together [2]. The Act does not yet set a deadline to reply. The Commissioner will set one [4]. For HR, expect requests from workers moving to a new employer or a new payroll provider.

The old approved country list for sending data overseas is gone. A controller may now send personal data overseas on grounds such as a destination with substantially similar law, the data subject's consent, performance of a contract, or reasonable precautions and due diligence [2]. The Commissioner issued Cross Border Personal Data Transfer Guidelines on 29 April 2025, and a transfer impact assessment stays valid for up to 3 years [2]. This matters if your attendance, HR or CCTV system stores data on servers outside Malaysia, or if your parent company runs HR from abroad.

The Commissioner has kept adding guidance. By May 2026 it had issued guidelines on Data Protection Impact Assessment, Data Protection by Design, and Automated Decision-Making and Profiling [5].

Checklist for worker data in your factory

  • List every system that holds worker data: HR, payroll, attendance terminals, access badges, CCTV, canteen cards, machine logins.
  • For each, note where the data is stored and whether the server is outside Malaysia.
  • Give workers a written notice in BM and English, plus the languages your foreign workers read, stating what you collect and why.
  • Treat fingerprint and face templates as sensitive data. Limit who can export them.
  • Set CCTV retention and who may view footage. Do not point cameras at rest areas or toilets.
  • Write a one page breach plan with names and the 72 hour deadline [4].
  • Check the DPO thresholds and register a DPO if you meet any of them [4].

Track your machines without collecting extra worker data

Our sensors read machines from the outside: power, stack light, temperature, vibration and part counts. You decide whether operator names are attached.

Questions

Does the PDPA cover employee data, or only customers?

Plan as if it covers both. You hold personal data about your workers. The DPO limits count all data subjects, staff and customers together [4].

How fast must a factory report a data breach?

Tell the PDP Commissioner within 72 hours of knowing about the breach. If significant harm is likely, also tell the affected people within 7 days after that [4].

Is fingerprint attendance allowed?

Yes, it is not banned. But biometric data is now sensitive personal data under the amended PDPA [2]. Collect it with clear notice and consent, and protect it well. Count those workers toward the DPO limit for sensitive data [4].

Sources

  1. [1]Skrine. Amendments to the Personal Data Protection Act 2010: Dates of Coming into Force, 2024-12-26
  2. [2]Mayer Brown. From Legislative Reform to Practical Guidance: Key Amendments to Malaysia's PDPA and the Launch of Cross Border Transfer Guidelines, 2025-07-25
  3. [3]Rahmat Lim & Partners. New Guidelines on Appointment of Data Protection Officer and Data Breach Notification, 2025-03-03
  4. [4]Halim Hong & Quek. Full Implementation of the Personal Data Protection (Amendment) Act 2024: Final Roundup, 2025-05-28
  5. [5]Baker McKenzie. Malaysia: New personal data protection guidelines, 2026-05-08