Industry4WRD Intervention Fund: rules and 2026 status
Published · 7 min read · IoTronix Solution
In short
The Industry4WRD Intervention Fund is closed. It was a MIDA matching grant that paid 70% of eligible project costs, up to RM500,000 [1]. It was for manufacturing SMEs that had finished the government funded Readiness Assessment [1]. MIDA stopped taking applications on 15 September 2023. MITI ended the Readiness Assessment on 1 January 2024. So new projects now go through Smart Tech Up [2][3][5].
First, the fund does not accept new applications
MIDA stopped accepting Intervention Fund applications on 15 September 2023, after the 2023 money was used up [2]. Only SMEs with a government funded Readiness Assessment (RA) report could apply. MITI stopped the RA from 1 January 2024 [1][3]. When we checked MIDA's Intervention Fund page and MITI's Industry4WRD page again on 17 November 2026, neither showed a notice reopening the fund [2][3]. Take it as closed unless MIDA publishes a new guideline.
The rules are still useful to know. Suppliers and consultants still quote them. Also, MITI calls Smart Tech Up an extension of the Industry4WRD policy. It works the same way: assessment first, then the project [5].
The rules in one table
| Item | Intervention Fund (MIDA guidelines, March 2023) |
|---|---|
| Matching ratio | 70:30 on eligible expenditure, government to company [1] |
| Maximum grant | RM500,000 per company [1] |
| People shift factor | Capped at RM50,000 within the grant [1] |
| Basis | Reimbursable; spending before MIDA's approval letter is not covered [1] |
| Upfront payment | Up to 30% of the 70% grant; 40% in Perlis, Kedah, Kelantan, Terengganu, Sabah and Sarawak [1] |
| Project period | Up to 12 months from MIDA's approval letter [1] |
| Balance claim | One claim, within 18 months of the approval letter [1] |
| Deadline to apply | Within 6 months of the MPC cover letter on the RA report [1] |
The Approval Committee decided the actual upfront amount based on the company's finances [1]. The balance came only after the company submitted a progress report, a completion report and proof of milestones [1].
Who could apply
- SMEs registered with the Companies Commission of Malaysia, in manufacturing or manufacturing related services [1].
- Companies that had completed the government funded Industry4WRD RA [1].
- Not eligible: SMEs with a shareholder holding more than 20% that is a main board listed company, an MNC, a large firm, a GLC or a government owned company [1].
- Not eligible for 3 years after their last payment: companies holding MIDA or MDEC Smart Automation Grant, or the Domestic Investment Strategic Fund for machinery upgrading. This rule did not apply in the six less developed states, or to companies with more than 51% Bumiputera equity [1].
What spending was covered, and what was not
MIDA only considered spending that the RA report recommended [1]. The project had to improve at least one shift factor: people, process or technology. It also had to use at least one Industry4WRD technology pillar [1].
The guidelines excluded these costs [1]:
- Purchase or rental of land, buildings, vehicles and furniture.
- Premise renovation.
- Collateral or loans not related to the approved project.
- Marketing and promotion.
- Operating costs such as salaries, employee benefits and travel.
- R&D activities, and working capital not related to the project.
In practice, this left machinery, systems, software, integration and training that the RA had recommended. Under 70:30 matching, a project of about RM714,000 would reach the RM500,000 cap, with the company paying the remaining 30% [1].
How the application worked
- Complete the RA and receive the report with the MPC cover letter [1].
- Within 6 months, submit to MIDA the application form, the RA report, a detailed technical proposal and audited financial statements for the past 3 years [1].
- In the proposal, cover background, scope, method of execution including potential solution providers, implementation period, cost breakdown and expected outcomes [1].
- MIDA evaluates technical viability, financial performance, projected impact on productivity and business growth, and adoption of at least one Industry4WRD technology pillar [1].
- The Intervention Fund Approval Committee decides, and its decision is final [1].
- Receive the upfront payment, run the project, then make the single balance claim with reports and milestones [1].
In February 2025, MITI said nearly 500 companies had benefited from the fund [4].
What to do now
- Look at Smart Tech Up instead. Press reports describe it as reimbursing 50% of project and training costs, up to RM500,000 [6]. Under 70:30 a company paid 30 sen of each ringgit; at 50% it pays 50 sen [1][6].
- Budget for the assessment. In October 2026, FMM asked the government to fully pay the RM8,000 Smart Factory Assessment fee. This means companies pay the fee now [8].
- Also claim the tax incentive. Under MIDA's Automation Capital Allowance guideline, you can claim the allowance on the part of the machinery cost that the grant does not cover [7].
- Do not spend before approval. The Intervention Fund did not pay for spending made before MIDA's approval letter [1]. Expect the same rule for any new grant, unless its guideline says otherwise.
- Know the 2026 co-investment option. Since July 2026, NIMP CoSIF adds RM2 for every RM1 that SMEs and mid-tier companies raise from private investors for smart manufacturing projects. This runs until 2030 [9]. It works through equity crowdfunding and peer-to-peer financing operators regulated by the SC, so it is investment or financing, not a grant [9].
Use real machine numbers in your next grant proposal
Book a free 30-minute Factory Paperwork Check. We come to your factory, show you the 3 processes that waste the most time, and reply within 1 working day.
Questions
Is the Industry4WRD Intervention Fund still open?
No. MIDA stopped accepting applications on 15 September 2023. The Readiness Assessment needed to apply ended on 1 January 2024 [2][3]. We checked again on 17 November 2026 and found no notice that it has reopened.
How much did the Intervention Fund pay?
It paid 70% of eligible costs, up to RM500,000. Up to 30% of the grant was paid upfront, or 40% in the six less developed states [1].
Which programme is most similar now?
Smart Tech Up. Press reports say it pays back 50% of project and training costs, up to RM500,000 [6].
Sources
- [1]MIDA. Guidelines and Procedures for the Application of Industry4WRD Intervention Fund (as at 27.03.2023), 2023-03-27
- [2]MIDA. Industry4WRD Intervention Fund
- [3]MITI. Industry4WRD, 2023-12-22
- [4]MIDA. Malaysia sets minimum target of 3,000 smart factories by 2030: MITI, 2025-02-20
- [5]EdgeProp (Bernama). 115 companies to be recognised as smart factories by end-2026: Miti
- [6]Daily Express (via Newswav). Government aid for smart factories, 2026-01-19
- [7]MIDA. Guidelines and Procedures for the Application of Automation Capital Allowance for Manufacturing and Services Sectors (as of 01.07.2024), 2024-07-01
- [8]The Edge Malaysia. Industry groups say Budget 2027 falls short of addressing rising business costs, 2026-10-10
- [9]Securities Commission Malaysia. NIMP CoSIF Expands Digitalisation Support with New Smart Manufacturing Scheme, 2026-07-21
