Skip to content
IoTronix Solution

Ferry and vessel data collection in Malaysia: JLM and IMO

Published · 6 min read · IoTronix Solution

In short

Malaysia's Marine Department (JLM) enforces the IMO fuel oil Data Collection System for Malaysian ships of 5,000 GT and above. These ships also get a yearly CII carbon rating from A to E. Smaller ferries and domestic vessels are below 5,000 GT, so these two rules do not apply. But they must still follow passenger limits under the Merchant Shipping Ordinance 1952 and keep AIS switched on. So it is useful to measure engine hours, fuel, position and passenger counts on board.

Every year, more people ask vessel operators for data: the flag administration, the class society, enforcement agencies, charterers and passengers. Some of these requests are law. Others are good practice that may become law later. This post explains which is which for Malaysian ferry and domestic vessel operators, and lists what can be measured on board.

IMO fuel oil data collection (DCS)

Under MARPOL Annex VI, ships of 5,000 gross tonnage and above must collect and report how much fuel oil they use each year [2]. JLM enforces this for Malaysian ships through Malaysia Shipping Notice MSN 05/2018 [2]. The first mandatory reporting year was 2019, and the Ship Energy Efficiency Management Plan (SEEMP) must describe how the ship collects fuel data [2].

For Malaysia-registered ships, recognised organisations such as Ships Classification Malaysia do three things for JLM: review the data collection plan, verify the data and submit it to the IMO database [2]. JLM then issues a Statement of Compliance for each calendar year of data [2].

From 2026, more detailed data is needed. Some existing ships of 5,000 GT and above did not start this by choice in January 2025. From 1 January 2026, these ships must record fuel use for each consumer (main engine, auxiliary engines, boilers). They must also record time underway and time not underway separately [3]. Data for 2026 must go for verification by 31 March 2027 [3].

CII ratings for ships of 5,000 GT and above

Since 1 January 2023, the Carbon Intensity Indicator (CII) applies to ships of 5,000 GT and above [1]. IMO lists ro-ro passenger ships and cruise passenger ships among the ship types covered [1]. Each ship gets an annual rating from A (best) to E [1]. A ship rated D for three years in a row, or E for one year, must submit a corrective action plan to reach C or better [1].

Rules for smaller ferries and domestic vessels

Many ferries, passenger boats and tourist vessels are below 5,000 GT, so DCS and CII do not apply to them. But Malaysian rules still apply.

  • Passenger capacity: carrying passengers beyond the permitted capacity is an offence under the Merchant Shipping Ordinance 1952. On 5 April 2026, MMEA detained a sunset cruise vessel off Pulau Bumbon Besar, Kedah for this offence [4].
  • AIS: in July 2025, MMEA and the Marine Department repeated that all vessels must keep AIS switched on at all times in Malaysian waters. If AIS is switched off for a short time, the operator must tell the Marine Department [6].
  • Cross-border passengers: under the Immigration (Amendment) Bill 2025, the master of a vessel must give a passenger name record and advance passenger information. Failing to do so, or giving false information, is an offence [5]. It takes effect on a date the Minister appoints by Gazette notice [5].

What an operator can measure on board

DataHow it is measuredWhich requirement it supports
Engine running hoursEngine run signal, current or tachometer pickupMaintenance planning, DCS methodology [2]
Fuel consumed per engineFlow meters on supply and return lines, tank level sensors, bunker recordsDCS reporting by consumer [3], CII [1]
Position, speed and distanceGPS logger, AISAIS obligation [6], distance for DCS and CII [3]
Underway and not underway timeGPS speed combined with engine statusEnhanced DCS from 2026 [3]
Passengers on boardGate or door counters, ticket scans at boardingCapacity limit under MSO 1952 [4], passenger records [5]

Even where no rule applies, the same data answers business questions: fuel per trip, idle time at the jetty, engine hours against the service interval, and load factor per sailing.

Where to start

  1. Confirm each vessel's gross tonnage and trading area. That decides whether DCS and CII apply [1] [2].
  2. Check that the AIS unit on every vessel works and stays on [6].
  3. Decide how you count passengers at boarding, and keep the record per sailing [4].
  4. Add fuel and engine hour logging, starting with the vessel that burns the most fuel.

Plan your on-board data collection

We design custom data-collection hardware and dashboards for marine and ferry use. Tell us your vessels and what you need to report.

Questions

Does the IMO fuel data rule apply to my ferry?

Only if the vessel is 5,000 gross tonnage or above [2]. DCS and CII do not apply to smaller vessels. But Malaysian rules on passenger capacity and AIS still apply [4] [6].

Who verifies DCS data for Malaysian ships?

Recognised organisations, such as Ships Classification Malaysia, verify the data and submit it to IMO for JLM. Then JLM issues the Statement of Compliance [2].

What happens if a ship gets a poor CII rating?

A ship rated D for three years in a row, or E in one year, must submit a corrective action plan showing how it will reach C or above [1].

Sources

  1. [1]International Maritime Organization. EEXI and CII: ship carbon intensity and rating system (FAQ)
  2. [2]Ships Classification Malaysia. SCM Circular 16/2018: Fuel Consumption Data Collection System (DCS) for Malaysian Ships, 2018-11-15
  3. [3]Clyde & Co. MARPOL Annex VI (Prevention of Air Pollution from Ships): Key Developments for 2026, 2026-04-28
  4. [4]Malay Mail. Sunset cruise off Kedah hits choppy waters with MMEA over too many passengers on board, 2026-04-07
  5. [5]Parliament of Malaysia (via CLJ). Immigration (Amendment) Bill 2025, 2025
  6. [6]Penningtons Manches Cooper. Heightened enforcement against illegal anchoring in Malaysian waters, 2025-08-06